Searching for a way to jazz up your wall art? Try making your own Diy acrylic frames for personalized 3D artwork. This submit will walk you by means of particularly how I created these in my home.
If you are on the lookout for a customized way to frame your pictures or artwork to make it stand out from the wall, these Do it yourself acrylic frames are the best factor.
I landed on these frames for the reason that I essential a small something to insert a very little added pizzazz to my toilet wall. 
We determined to include my partner&rsquos appreciate of golfing into the mix by printing pics he took of PGA golfing classes he&rsquos performed in black and white.
I enjoy when artwork is a discussion piece, so this was the perfect addition to the toilet wall.
To make it really stand out, I built these Diy acrylic frames for each of the photographs.
Listed here are the measures I took&hellip 
Table OF CONTENTS
- one. Collect your elements.
- 2. Tape every aspect of every single corner.
- 3. Mark exactly where you want to drill your holes.
- 4. Drill your holes.
- five. Use your glue dots to secure your images to the body.
- 6. Mark the entire on the wall the place you strategy to hold it.
- seven. Use your punch resource to mark the complete on the wall.
- 8. Drill your holes in the wall.
- 9. Screw the standoffs into the wall.
- ten. Connect your frame to the standoffs.
- eleven. Revel in the completed product!
Disclaimer: This submit does consist of affiliate backlinks for your advantage. This is at NO more expense to you but earns me a compact commission. To browse additional, check out out our disclosure plan.
1. Assemble YOUR Products.
Initial points first, get all your elements. All resources for every thing I used are connected under. I also involved a listing with back links of what we utilised to dangle the frames, as well. 
FOR Creating THE Do-it-yourself ACRYLIC FRAMES:
- Plexiglass/Acrylic Sheets
- Standoffs
- Glue Dots
- Piece of Lined Paper
- Drill 
- Drill Bits (a single for the measurement of the opening of your standoffs and 1 for the screw for the wall)
- Painter&rsquos Tape
- Ruler
- Marking Device (I utilised a Sharpie)
FOR HANGING THE Diy ACRYLIC FRAMES:
- Pencil
- Handheld Degree
- Punch
- Screwdriver
2. TAPE Every Facet OF Every CORNER.
Plexiglass/acrylic is really delicate.
Mainly because of this, you have to be pretty watchful when you are drilling the holes.
Inserting a piece of painter&rsquos tape on both facet the place you plan to drill your hole will aid retain the acrylic sheet from breaking or cracking when you drill.
I also stored the protective protect on each individual side of the piece, too.
three. MARK Where by YOU WANT TO DRILL YOUR HOLES.
At the time you have positioned the painter&rsquos tape on all four sides (or on the other hand quite a few spots you plan to drill a hole), you can place a mark of exactly where you want to drill your gap.
I drilled my holes one&Primary in from every edge as you can see from the picture previously mentioned.
4. DRILL YOUR HOLES.
Ahead of in fact drilling, double and triple check that your marks are amount each horizontally and vertically.
You&rsquoll want to have these amount for when you cling them. 
The drill bit you choose must be big ample to permit the standoff to fit in just the hole.
I would do a examination run on a piece of scrap substance to make guaranteed it is huge enough. 
After you are particular that the marking are degree and the little bit is large sufficient, you want to commence drilling.
Here is a superior video clip to adhere to if you would like a demonstration on how to drill through acrylic.
You want to use about fifty percent energy when you are drilling.
Slow and continual. If you go to quick, the acrylic will crack, so just take your time.
As you drill you should see spirals of the acrylic gradually currently being taken out. 
Repeat the drilling for every single hole you want.
five. browse this site YOUR GLUE DOTS TO Safe YOUR Pics TO THE Frame.
When your holes are created, you can insert your photo to the piece of acrylic/frame.
The crucial below is to yet again, make absolutely sure your picture is degree before you fully safe it to the frame.
The glue dots are pretty sticky and don&rsquot make it possible for for a good deal of wiggle space, so it might be a very good plan to line up a piece of lined paper behind the frame to assist you line the edges of your photo.
Whatsoever trick works for you to make positive the photograph receives glued to the body amount will do. 
six. MARK THE Total ON THE WALL Wherever YOU Program TO Hang IT.
As you start out to hang, mark your holes on the wall, but make certain your frame is amount.
If you measured correctly in the step prior to drilling, the holes on your body should presently be amount.
If you are hanging additional than 1 body like I did, make guaranteed each frame is degree in your grid, as well. 
seven. USE YOUR PUNCH Resource TO MARK THE Total ON THE WALL.
I adore this instrument so significantly for the reason that it receives your gap started out and allows your drill to stay in spot when you start off drilling.
If you don&rsquot have one, I very endorse it!
eight. DRILL YOUR HOLES IN THE WALL.
Be sure to use a little bit that suits the screws that came together with your standoffs.
This will most most likely be a scaled-down bit than the just one you applied on the frames.
I also utilized a stud finder to see if I required drywall anchors, but mainly because these frames are not that large, you could most likely do devoid of them.
9. SCREW THE STANDOFFS INTO THE WALL.
At the time you obtain your standoffs, you&rsquoll see how they get the job done.
In purchase for the picture to &ldquostand off&rdquo the wall, you have to secure the standoff with the supplied screw just before attaching the image to the standoffs.
As you can see from the picture, building confident everything is amount and measured properly is super crucial. 
ten. Connect YOUR Body TO THE STANDOFFS.
When you&rsquove attached the standoffs, it&rsquos time to attach the shots!
Line up the standoffs with your drilled holes and secure the standoffs.
If all goes properly, everything will line up properly and be all set to go!
If you are like my father and I, you&rsquoll come across at least one particular that doesn&rsquot line up beautifully.
For this, we cheated a little little bit and secured the standoff to the body and employed a glue dot to protected it to the wall, so it didn&rsquot shift.
We only experienced to do this for two corners of two frames, but don&rsquot stress if you mess up a single&hellip We&rsquove been there! 
11. REVEL IN THE Completed Solution!
Now it&rsquos time to take pleasure in your work!
We did a grid of 9 total pictures which was a big undertaking with all the measuring, but I&rsquom in adore with how it turned out.
Permit me know in the feedback what you consider of the finished merchandise!
Add Comment